HID XENON UPGRADE KITS
LANCE / STRIKER / BLITZ
Genuine Lightforce HID upgrade kits convert your existing Lance 140/Striker 170 or Blitz 240 lights to new generation HID technology using original equipment components to optimise performance. Ballast is mounted remotely to the light with 1.5 metre long leads for concealed ballast mounting. Brighter and whiter light with 5000k super white bulbs.
GENESIS
Still want MORE light from your Lightforce Genesis 100 watt halogen lights?
Then upgrade Xenon HID with this comprehensive, easy to install kit that contains all the required components to upgrade a pair of Genesis lights up to 70w HID.
As with our existing upgrade kits the bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits.
XENON HID bulbs used in these kits have been specially manufactured to match the ballast outputs with the physical size of the bulb capsule 15% larger over the standard 35w bulb.
• Colour rendering is 4200°K, 5000°K or 6000°K
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC Digital ballast
• Operating input voltage range from 12 ~ 32 volts therefore can be used in both 12 and 24 volt applications
• The electronics are fitted internally within the housing
• Supplied in pairs
• Fully compatible with latest DL210 models (halogen) using the Bi pin 100 watt high output Xenophot bulb
• Kit is also fully backwards compatible with all previous DL210 (halogen) models
Specifications – 50w/70w HID (internal ballast)
Input voltage range 12 ~ 32 volts
Operating voltage 13.2 volts DC (typical)
Recommended operating temperatures (ambient)
-40°C > +40°C Maximum
-40°F > +104°F Maximum
Dependent on the model Genesis you have it is also possible to upgrade to a 70w HID (internal ballast). To upgrade to 70w your light must have the Bi pin 100 watt high output Xenophot bulb fitted.
Lumen output:
50w | 5000 lumens
70w | 6400 lumens
Existing 35w 3200 lumens
XGT
A comprehensive and easy to install high performance XENON HID upgrade kit that maintains the water tight integrity of the light.
Designed for maximum power output utalising purpose made bulbs matched to the relevant ballast wattage output, one size does not fit all!
• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits
• The physical size of the bulb capsule is 15% larger over the standard 35w bulb
• Colour rendering is 4200K, 5000K and in 6000K for 70w only (alternative Kelvin temperatures can be specially made to order)
• Only equipment required for installation is a drill – preferably one with a clutch, everything else is supplied including the hole saw and hex key to remove the rear cover plate
• Specialised cable glands are included that simply click into place (once the hole is drilled) with an IP 68 hermetically sealed rating to maintain the water tight integrity of the light, with a strain relief in accordance with EN 50262
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC digital ballast
• 12 or 24 volt models available
• Waterproof connectors provided
• Long 1.2 meter lead between external ballast and the driving light allows secured remote mounting
• Supplied in pairs
Lumen output: 50 watt 5000 lumens, 70 watt 6400 lumens, Existing 35w 3200 lumens
XGT HID upgrade kits (sold in pairs)
NOTE: This kit is not suitable for upgrading the existing internal 35/50 watt DL240HID range of lights
LANCE / STRIKER / BLITZ
Genuine Lightforce HID upgrade kits convert your existing Lance 140/Striker 170 or Blitz 240 lights to new generation HID technology using original equipment components to optimise performance. Ballast is mounted remotely to the light with 1.5 metre long leads for concealed ballast mounting. Brighter and whiter light with 5000k super white bulbs.
GENESIS
Still want MORE light from your Lightforce Genesis 100 watt halogen lights?
Then upgrade Xenon HID with this comprehensive, easy to install kit that contains all the required components to upgrade a pair of Genesis lights up to 70w HID.
As with our existing upgrade kits the bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits.
XENON HID bulbs used in these kits have been specially manufactured to match the ballast outputs with the physical size of the bulb capsule 15% larger over the standard 35w bulb.
• Colour rendering is 4200°K, 5000°K or 6000°K
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC Digital ballast
• Operating input voltage range from 12 ~ 32 volts therefore can be used in both 12 and 24 volt applications
• The electronics are fitted internally within the housing
• Supplied in pairs
• Fully compatible with latest DL210 models (halogen) using the Bi pin 100 watt high output Xenophot bulb
• Kit is also fully backwards compatible with all previous DL210 (halogen) models
Specifications – 50w/70w HID (internal ballast)
Input voltage range 12 ~ 32 volts
Operating voltage 13.2 volts DC (typical)
Recommended operating temperatures (ambient)
-40°C > +40°C Maximum
-40°F > +104°F Maximum
Dependent on the model Genesis you have it is also possible to upgrade to a 70w HID (internal ballast). To upgrade to 70w your light must have the Bi pin 100 watt high output Xenophot bulb fitted.
Lumen output:
50w | 5000 lumens
70w | 6400 lumens
Existing 35w 3200 lumens
XGT
A comprehensive and easy to install high performance XENON HID upgrade kit that maintains the water tight integrity of the light.
Designed for maximum power output utalising purpose made bulbs matched to the relevant ballast wattage output, one size does not fit all!
• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits
• The physical size of the bulb capsule is 15% larger over the standard 35w bulb
• Colour rendering is 4200K, 5000K and in 6000K for 70w only (alternative Kelvin temperatures can be specially made to order)
• Only equipment required for installation is a drill – preferably one with a clutch, everything else is supplied including the hole saw and hex key to remove the rear cover plate
• Specialised cable glands are included that simply click into place (once the hole is drilled) with an IP 68 hermetically sealed rating to maintain the water tight integrity of the light, with a strain relief in accordance with EN 50262
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC digital ballast
• 12 or 24 volt models available
• Waterproof connectors provided
• Long 1.2 meter lead between external ballast and the driving light allows secured remote mounting
• Supplied in pairs
Lumen output: 50 watt 5000 lumens, 70 watt 6400 lumens, Existing 35w 3200 lumens
XGT HID upgrade kits (sold in pairs)
NOTE: This kit is not suitable for upgrading the existing internal 35/50 watt DL240HID range of lights
LANCE / STRIKER / BLITZ
Genuine Lightforce HID upgrade kits convert your existing Lance 140/Striker 170 or Blitz 240 lights to new generation HID technology using original equipment components to optimise performance. Ballast is mounted remotely to the light with 1.5 metre long leads for concealed ballast mounting. Brighter and whiter light with 5000k super white bulbs.
GENESIS
Still want MORE light from your Lightforce Genesis 100 watt halogen lights?
Then upgrade Xenon HID with this comprehensive, easy to install kit that contains all the required components to upgrade a pair of Genesis lights up to 70w HID.
As with our existing upgrade kits the bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits.
XENON HID bulbs used in these kits have been specially manufactured to match the ballast outputs with the physical size of the bulb capsule 15% larger over the standard 35w bulb.
• Colour rendering is 4200°K, 5000°K or 6000°K
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC Digital ballast
• Operating input voltage range from 12 ~ 32 volts therefore can be used in both 12 and 24 volt applications
• The electronics are fitted internally within the housing
• Supplied in pairs
• Fully compatible with latest DL210 models (halogen) using the Bi pin 100 watt high output Xenophot bulb
• Kit is also fully backwards compatible with all previous DL210 (halogen) models
Specifications – 50w/70w HID (internal ballast)
Input voltage range 12 ~ 32 volts
Operating voltage 13.2 volts DC (typical)
Recommended operating temperatures (ambient)
-40°C > +40°C Maximum
-40°F > +104°F Maximum
Dependent on the model Genesis you have it is also possible to upgrade to a 70w HID (internal ballast). To upgrade to 70w your light must have the Bi pin 100 watt high output Xenophot bulb fitted.
Lumen output:
50w | 5000 lumens
70w | 6400 lumens
Existing 35w 3200 lumens
XGT
A comprehensive and easy to install high performance XENON HID upgrade kit that maintains the water tight integrity of the light.
Designed for maximum power output utalising purpose made bulbs matched to the relevant ballast wattage output, one size does not fit all!
• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow “V” line common in aftermarket kits
• The physical size of the bulb capsule is 15% larger over the standard 35w bulb
• Colour rendering is 4200K, 5000K and in 6000K for 70w only (alternative Kelvin temperatures can be specially made to order)
• Only equipment required for installation is a drill – preferably one with a clutch, everything else is supplied including the hole saw and hex key to remove the rear cover plate
• Specialised cable glands are included that simply click into place (once the hole is drilled) with an IP 68 hermetically sealed rating to maintain the water tight integrity of the light, with a strain relief in accordance with EN 50262
• Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference
• Fully sealed and water resistant compact slim-line AC digital ballast
• 12 or 24 volt models available
• Waterproof connectors provided
• Long 1.2 meter lead between external ballast and the driving light allows secured remote mounting
• Supplied in pairs
Lumen output: 50 watt 5000 lumens, 70 watt 6400 lumens, Existing 35w 3200 lumens
XGT HID upgrade kits (sold in pairs)
NOTE: This kit is not suitable for upgrading the existing internal 35/50 watt DL240HID range of lights